D
Deleted member 5600
Gast
Hier gibt es einige Ersatzteile für den Tamiya Neo Fighter:
Fordere Stoßdämpferbrücke:
Hintere Stoßdämpferbrücke:
Hintere Querlenker:
Servo Saver:
C-Hubs:
Servohalterung:
Unteres Stoßdämpferende:
Vordere Stoßstange plus Skidplatte:
Heckspoiler:
Heckspiler-Halteclips:
Felgen:
Gruß Play
Fordere Stoßdämpferbrücke:
Tamiya Neo Fighter DT-03 front suspension mount by bxd2000
Spare front suspension mount for the Tamiya DT-03 when no genuine spare part is available. It's pretty similar to the genuine part and - depending on your filament choice - should work just as well or even better.
www.thingiverse.com
Dämpferbrücke vorne Tamiya Neo Figther DT-03 by Ael79
Vordere Dämpferbrücke eines Tamiya Neo Fighter Buggy DT-03
www.thingiverse.com
Hintere Stoßdämpferbrücke:
Tamiya Neo Fighter DT-03 rear suspension mount by bxd2000
Spare rear suspension mount for the Tamiya DT-03 when no genuine spare part is available. It's pretty similar to the genuine part and - depending on your filament choice - should work just as well or even better.
www.thingiverse.com
Hintere Querlenker:
Tamiya Neo Fighter DT-03 - rear lower suspension arm by bxd2000
Rear lower suspension arm for the Tamiya DT-03 (Neo Fighter). The holes for the long screws should be cleared with a 3 mm or 3.2 mm drill. Toe-in is 1.6° and should be equal to the genuine part. There are two files available: 01 - easier to print; especialy when printing PETG at high temperature...
www.thingiverse.com
Servo Saver:
Tamiya Neo Fighter DT-03 Servo Saver by JaWu
This is a replacement / spare part for the steering servo saver of a Tamiya Neo Fighter. It suits perfect to the Tamiya DT-03 chassis. Maybe also to other Tamiya models. My original one cracked the first day and i could not wait for the delivery of the spare part. So far it works great. Printed...
www.thingiverse.com
C-Hubs:
C-Hub for Tamiya DT-03 and similar by froetz
My son crashed the c-hub on his tamiya neo fighter, so I took a short measure and designed the c-hub by myself, to get the car back on the track. The holes have to be smoothed with a 3mm drill or better with a 3mm reamer. The arrow points to the upper side. It fits to tamiya DT-03-chassis and...
www.thingiverse.com
Servohalterung:
tamiya DT-03 Servo mount by hawksquawks
Simple servo mount for a DT-03 Chassis. I designed this after purchasing a second hand neo fighter rolling chassis that did not come with a servo mount.
www.thingiverse.com
Unteres Stoßdämpferende:
DT-03 Damper part V2 F4 by Flachzange
My first try for the broken damper part V2 of my Tamiya Neo Fighter DT-03... This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/hCDezf1lEMn
www.thingiverse.com
Vordere Stoßstange plus Skidplatte:
TAMIYA NEO FIGHTER Front Skid and Bumper by pbroeder
Front skid and bumper for the Tamiya Neo Fighter Printed it sideways, with supports. Enjoy!
www.thingiverse.com
Heckspoiler:
Tamiya DT-03 SPOILER Neo Fighter by carwenni
After i killed 4 Spoiler on my Neo Figther i decided to design my own. I drive with this spoiler very sucessful. It is flexiblity and strong together.
www.thingiverse.com
Heckspiler-Halteclips:
Tamiya DT-03 Spoiler Holder Neo Fighter by carwenni
For my own designed Spoiler i designed a Spoiler Holder too. With this Holder it is possible to adjust the height of the Spoiler.
www.thingiverse.com
Felgen:
1:10 2WD Beadlock Rims (Tamiya Neo Fighter) by bxd2000
These are beadlock rims I made for my Tamiya DT-03 (Neo Fighter, rear: 12 mm hex; front: bearings) stock tires. So far I couldn't test them, but I am pretty confident, that they work. But for the time being I will consider them work in progress. Parts for the front wheels (each): 1x FW-inside 1x...
www.thingiverse.com
Tamiya Neo Fighter custom rims 1.9 inch no supports, one piece by MoMaHo
I was tired of getting stuck in the gras when driving with my stock-motorized Neo Fighter. So I got some 1.9 rock crawler tires and fitted them on front- and rearaxle using custom rims. Designed similar to the famous "Mangels"-chrome-rims, which I always wanted to have when driving my first car...
www.thingiverse.com
Tamiya Neo Fighter wheels by bxd2000
These are wheels for the Tamiya DT-03 chassis (Neo Fighter, Racing Fighter...). I didn't print them yet as I only need the 3D models. If you do so, please leave a feedback. You will need to print with supports and a layer hight of 0.15+. The design slightly differs from the genuine wheels...
www.thingiverse.com
Tamiya Neo Fighter Rims by eisklotz
New rims for you Neo Fighter Buggy? Remove the original tires and put them on the new rims.
www.thingiverse.com
Gruß Play