Projekt ESP32 Arduino RC Sound und Licht Controller

Nolethai

Mitglied
Hallo Emanuel,
welchen Vibrationsmotor (Shaker) hast du genommen? Ich bin noch auf der Suche und freue mich über Hilfe und Hinweise.
Die ich bestellt hatte waren viel zu klein.
Viele Grüße
Norbert
 

Outlet

Mitglied

FrikkieBester

Mitglied
Looks very god. How are you switching the trailer lights on and off during coupling / uncoupling? Is there a switch on the trailer, which is detecting the 5th wheel? Do you have detail pictures?
I put a limit switch underneath....but when I took the picture now I realised I fitted the "wrong" way round for when hooking on the trailer! I still want to fit one on the other side also to ensure a switch is closed no matter the angle of the truck.

Switch.JPG Switch 2.JPG Switch 3.JPG
 

Mitsumaniac

Mitglied
Hi, anyone having problems with heat ...?
Tried to read through all the comments but found nothing.
Had to put a fan and enclosure to bring down temperatures from burning up the card.
Built the compact versions with only a 30-pin ESP
 
Zuletzt bearbeitet:
If you have thermal problems, something is wrong with your wiring. Did you use series resistors for the LED? Also note, that the absolute maximum voltage for the PAM amplifier is 5.5V. Post a picture of your board.
 

Mitsumaniac

Mitglied
If you have thermal problems, something is wrong with your wiring. Did you use series resistors for the LED? Also note, that the absolute maximum voltage for the PAM amplifier is 5.5V. Post a picture of your board.
4,6v on the board, just a BEC connected to the servo cable. After a few minutes the components on the board get really hot.
Maby a bad batch, built 2 identical, they work great otherwise... Just a small whining noise from the speaker when everything is connected...
 

Anhänge

GeeKaa

Mitglied
Hallo Gerad,
sind das die Bauteile um die SMD-Platine selber zu bestücken?
Viele Grüße
Norbert
Indeed Norbert. I had to pay a lot of import duties and VAT for the first version. The note from PCBWAY was more than doubled. When Martin approves his new boards I want to order a few here in Holland without components. I like The connector for the display haha. Can I immediately see if my soldering skills (over 60 years of experience) are still okay.
 
Zuletzt bearbeitet:
Top Bottom