• Hallo Zusammen, Aufgrund der aktuellen Situation setzten wir die Möglichkeit aus, sich mit Gmail zu registrieren. Wir bitten um Verständnis Das RCMP Team

Projekt ESP32 Arduino RC Sound und Licht Controller

Nolethai

Mitglied
Hello Frikkie,
your truck looks very good and the trailer is very interesting. I waiting for see the complete truck. Good work. I am waiting for resistors. The resistors i have i calculate wrong.
 

FrikkieBester

Mitglied
Hello Frikkie,
your truck looks very good and the trailer is very interesting. I waiting for see the complete truck. Good work. I am waiting for resistors. The resistors i have i calculate wrong.
Hello Nobert,

I fit 330ohm on all my LED's...

Thank you, I am from South Africa, and my cousin own's a livestock transport company. I am basing my truck on this real ones...look wise I still prefer the older design of the cattle trailers (like behind the Volvo), but the newer designs are much lighter (behind Scania)...
IMG_4543.JPG IMG_4544.JPG

Will post some pictures and videos once I am done. In December I a going to go visit him on his farm...and then it must all be done for some 1:1 and 1:14 pictures!

Regards,

Frikkie
 

FrikkieBester

Mitglied

Nolethai

Mitglied
Hello Frikkie, hello Martin,
It must be very interesting to drive truck like this in real. In Germany i only drive truck with one trailer.
Iwould like to know more about your "trailer-system" in 1/14.How about the coupeling between the first and the second trailer.
I saw that Martin included the pig sound in his code.
I am Norbert (56 years old) from Germany, now we stay in Thailand. In Germany i was a truckdriver. Then we stay 2,5 years in Thailand (my wife is from Thailand) and after this we go back to Germany. In Germany we stay for 5 years and i drived truck again. Baut then our twins (11 years old), my wife and i wished to stay in Thailand again. So 1,5 years ago (March 2020) we go back to Thailand.Because we flight 2 weeks earlier than we have planed (reson was corona and we worried that we can not fly) we not take all we want. So my 2 trucks still in Germany and waiting for pick up. some weeks ago my wife allowed me to buy new remote and new truck from herkules hobby.

I very happy in joining this forum and meet people like you. The ESP32 Sound & Light Controller (and the other projects) from Martin is great. Also the smaller trailer ESP32 from Frikkie is very interesting.
It`s nice to meet you and ervery one in this forum.

Thank you!

When i start build a trailer for my truck i will take photos too and post. Maybee i need to built the trailer by myself and not buy like a kit. We will see.

Kindly regards
Norbert
 

FrikkieBester

Mitglied
Hello Frikkie, hello Martin,
It must be very interesting to drive truck like this in real. In Germany i only drive truck with one trailer.
Iwould like to know more about your "trailer-system" in 1/14.How about the coupeling between the first and the second trailer.
I saw that Martin included the pig sound in his code.
I am Norbert (56 years old) from Germany, now we stay in Thailand. In Germany i was a truckdriver. Then we stay 2,5 years in Thailand (my wife is from Thailand) and after this we go back to Germany. In Germany we stay for 5 years and i drived truck again. Baut then our twins (11 years old), my wife and i wished to stay in Thailand again. So 1,5 years ago (March 2020) we go back to Thailand.Because we flight 2 weeks earlier than we have planed (reson was corona and we worried that we can not fly) we not take all we want. So my 2 trucks still in Germany and waiting for pick up. some weeks ago my wife allowed me to buy new remote and new truck from herkules hobby.

I very happy in joining this forum and meet people like you. The ESP32 Sound & Light Controller (and the other projects) from Martin is great. Also the smaller trailer ESP32 from Frikkie is very interesting.
It`s nice to meet you and ervery one in this forum.

Thank you!

When i start build a trailer for my truck i will take photos too and post. Maybee i need to built the trailer by myself and not buy like a kit. We will see.

Kindly regards
Norbert
Hello,

The work Martin has done is really amazing, and it has brought people with similar interest from all over the world together! I have a mechanical engineering background and I have learnt so much about electronics, components and coding...even how to solder properly!

I am 45 years old and my son is 6...and we play very nicely with our trucks! Dad and son time!

I drove the cattle links while I was studying from 1998-2003. It was great fun, transporting livestock is different, and the people on the farms are always very friendly.
FB Volvo.JPG
From there I went to the UK and drove trucks there for 2 years before I came back to SA and started working at VWSA...still there 20 years later! With my job I have been lucky enough to travel to Germany (before Corona) every year at least twice!
I started building my trailer by using 2 pole trailers for the suspension...the rest has been hand build using aluminium, stryrene and lots of glue!!! Never done this before and has been a steep learning curve! Was going very well until the cat jumped on the table and the rear trailer's 2 pieces fell on the floor :-(
Pole Trailers.JPG Pieces.JPG Link.JPG

Pushed my project aside and started "overhauling" an old King Hauler for my sons 6th birthday! Also got the full DIYGuy999 treatment with sound and lights (flashing "beacon" lights in the grill and on the roof) But now I have no more excuses...I have to get mine done before the 11th of December!


Old.JPG King Kenworth.JPG

Regards,

Frikkie

P.S. Sorry Martin...we have gone completely off topic here!
 

Anhänge

P.S. Sorry Martin...we have gone completely off topic here!
No problem, interesting story and thanks for the praise. I have worked on the trailer update:
Bildschirmfoto 2021-11-17 um 18.20.35.png
Und wieder mal was in Deutsch:
  • Es können nun 2 Anhänger drahtlos verbunden werden. Frikkie muss somit keine Kabel vom vorderen zum hinteren Aufleger ziehen.
  • Die Signale werden nur gesendet, wenn eines geändert hat. Vorteile:
    • Längere Batterielaufdauer
    • ESP32 wird weniger warm
    • Weniger 2.4GHz Strahlung :devilish:
    • Weniger "Nebengeräusche" im Sound, verursacht durch WiFi
  • Es werden nun auch weitere Signale gesendet, welche die Servoausgänge im Anhänger-Board ansprechen:
    • Servo für Stützen auf / ab (über Horn-Pot, wenn Sattelplatte entriegelt ist)
    • Servo für Auffahrrampen auf / ab (über Horn-Pot, wenn Warnblinker an ist)
    • Signal zur Steuerung einer Rundumleuchte, synchron zu jener am LKW (über Horn / Sirene Pot)
Testaufbau:
IMG_2735D.JPG
Das grüne Board ist der Master, mit Servo zur Sattelplatten-Entriegelung
Das weisse ist das 1. Anhängerboard mit Servos und Drehlicht
Es ist noch ein weiterer ESP32 als 2. Anhänger verbunden.
 

FrikkieBester

Mitglied
No problem, interesting story and thanks for the praise. I have worked on the trailer update:
Den Anhang 112948 betrachten
Und wieder mal was in Deutsch:
  • Es können nun 2 Anhänger drahtlos verbunden werden. Frikkie muss somit keine Kabel vom vorderen zum hinteren Aufleger ziehen.
  • Die Signale werden nur gesendet, wenn eines geändert hat. Vorteile:
    • Längere Batterielaufdauer
    • ESP32 wird weniger warm
    • Weniger 2.4GHz Strahlung :devilish:
    • Weniger "Nebengeräusche" im Sound, verursacht durch WiFi
  • Es werden nun auch weitere Signale gesendet, welche die Servoausgänge im Anhänger-Board ansprechen:
    • Servo für Stützen auf / ab (über Horn-Pot, wenn Sattelplatte entriegelt ist)
    • Servo für Auffahrrampen auf / ab (über Horn-Pot, wenn Warnblinker an ist)
    • Signal zur Steuerung einer Rundumleuchte, synchron zu jener am LKW (über Horn / Sirene Pot)
Testaufbau:
Den Anhang 112949 betrachten
Das grüne Board ist der Master, mit Servo zur Sattelplatten-Entriegelung
Das weisse ist das 1. Anhängerboard mit Servos und Drehlicht
Es ist noch ein weiterer ESP32 als 2. Anhänger verbunden.
Thank you! I am going to try another compact version....

ESP32 Back.jpg
 

FrikkieBester

Mitglied

Nolethai

Mitglied
Hallo Martin,
Du bist einfach genial.

Das man jetzt zwei Trailer wireless mit dem Master verbinden kann und dann auch noch Servos und Rundumleuchten anschließen kann...........einfach genial. Über Rundumleuchten am Trailer hatte ich mir auch schon Gedanken gemacht wie das zu realisieren wäre. Aus diesem Grund hatte ich mir einen zweiten Empfänger von Flysky bestellt, da ich auf youtube ein Video gesehen hatte wo jemand 2 Empfänger gleichzeitig mit eine Flysky FS6 S verbunden hat. Wenn das geklappt hätte, hätte ich einen Empfänger und ein komplettes zweites ESP32 Sound & Light Board zusätzlich in den Trailer gepackt. Ich werde es ausprobieren und euch berichten, aber im Endefekt werde ich das so nutzen wie Du das entwickelt hast und den zweiten Empfänger in einem anderen Truck nutzen. Wie gesagt, Martin Du bist genial. Danke!
Ich habe da vieleicht eine blöde Frage, aber zur Zeit weiß ich nicht wie ich an die mac-Adresse des ESP32 komme.
Du hat doch auch die Flysky FS6 S, ich nutze als Empfänger einen Flysky FS-A8S. Der soll ibus und s-bus können. Wenn ich aber den Sender auf Output sbus stelle, tut sich da gar nichts. Mit ibus funktioniert es.

Ich habe heute den Magirus "getestet", super Sound. Ist fast so wie der Magirus Mercur (als Küchenwagen) den ich beim Deutschen Roten Kreuz fahren durfte. Der Wunsch diesen Magirus Mercur (unsiyncronisiertes Getriebe) Küchenwagen im Modell nachzubauen ist jetzt wieder aufgeflammt und wartet auf Ideen für den Bau. Mal sehen, ich werde dann wenn auch die Fotos nicht vergessen.

Frikkie hat aber auch gute Ideen.

Viele Grüße und viel Gesundheit wünscht
Norbert
 
Zuletzt bearbeitet:
Ich habe da vieleicht eine blöde Frage, aber zur Zeit weiß ich nicht wie ich an die mac-Adresse des ESP32 komme.
Hallo Norbert,
vielen Dank für das Lob. Einfach den ESP32 mit dem Trailer Sketch am USB einstecken und den Serial Monitor öffnen ;) :
Bildschirmfoto 2021-11-18 um 17.14.10.png
Die Adresse wird dann angezeigt.

Das mit dem nicht funktionierenden SBUS scheint bei Flysky normal zu sein. Es scheint vom verwendeten Empfänger abzuhängen. Die können anscheinend nicht alle SBUS.
 
Den gibt's jetzt auch :D:
 
Top Bottom